Teejet Legacy 6000 Manual Manual de usuario descargar pdf (Pagina 99)

Chapter 4 - Operation94

Table 4-3: Headland Guidance Softkeys

Softkey Description

Selects a guidance pattern (typically Headland).

Headland On. Begins Headland application. Make as many headland passes as

desired. The operator can establish a boundary map and Mark Points A and B during

rstpassapplication.

Headland Off. When the last headland pass is complete, press this softkey. The opera-

torthenappliestherstinteriorpassusingtheHeadlandpatternforguidance.

IgnoreHeadland.Oncetherstinteriorpassiscomplete,switchfromthecurrent

guidance pattern to the Ignore Headland pattern. Continue to apply the remainder of

theeld.

To use Ignore Headland Guidance mode after the completion of the initial Head-

landpasses,begintheapplicationprocessfortheinterioroftheeld.Pressthe

Ignore Headland button to initiate the Ignore Headland Guidance mode. This will

indicate to the vehicle that headland passes exist so they won’t be used for guid-

ance purposes.

If the operator forgot to turn headland off after turning it on:

consider all sprayed passes so far as part of the headland

•

complete the current pass•

press the • Headland Off softkey

make a pass guiding along the headland (last pass)

•

switch to Ignore Headland mode•

continue making passes•

If the operator forgot to mart the headland:

complete the current pass

•

press the Headland ON softkey and make another pass along the Head-•

landsintheeld.

switch the guidance pattern to Ignore Headland mode and spray the re-

•

mainderoftheeld.

Headland Off

softkey

Ignore Headland

softkey

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 158 159

Sin comentarios

Teejet Legacy 6000 Manual Manual de usuario Pagina 99