Teejet Legacy 6000 Manual Manual de usuario descargar pdf (Pagina 31)

Chapter 2 - System Overview26

Table 2:6 - Pre-Created Channel Favorites

Name Description

GRANDC-A DenesagranularapplicationinSplit-Drivewiththreemonitors.

GRANPWM-A DenesagranularapplicationusingaPWMvalve.

GRANSERVO-A DenesagranularapplicationusingaServovalvewithonemonitor(shaft).

GRANSERVO-B DenesagranularapplicationusingaServovalvewithnomonitor.

INJ-A Denesaninjectionapplication.

LIQFLOW-A Denesaliquidapplicationusingaowmeterwithonemonitor.

SPINMOTOR-A Denesashaftsensorusedtocontrolspinnerspeed.

Application Type

The Application Type Setup page allows for the selection of the required type of

product application. All other setup pages are based on the type of application

chosenonthispage.Therearevepossibleapplicationtypes:

Liquid

•

Granular•

Seeder•

NH3•

Motor•

For each application type there is an additional Settings page. To access the Set-

tings page, press the Settings softkey on the Application page (refer to Table 2-7).

If there are no changes required, press the Forward Arrow softkey to advance to

the next Channel Setup page.

When changing application type, the Finish Flag softkey may disappear. This but-

ton disappears if the change in application type caused additional changes to other

Channel setup parameters. It may be necessary to continue viewing the remain-

ingsetupparameterspriortonishingthechannelsetupprocess.Ifnoadditional

Channel parameter changes occurred, the Finish Flag softkey will be displayed.

Pressing the Finish FlagsoftkeywillactivatethenalSetup page. From the Finish

page,updatethechannelwiththenewsetuple.

Settings softkey

(F2)

Forward Arrow

softkey (F6)

Finish Flag

softkey (F7)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 158 159

Sin comentarios

Teejet Legacy 6000 Manual Manual de usuario Pagina 31