Teejet Legacy 6000 Manual Manual de usuario descargar pdf (Pagina 156)

Legacy 6000

98-05053 R2

151

1. Enter Channel Setup and navigate to Primary Sensor. Select the Settings

softkey.

2. Use the Arrow keys to highlight Cal# Basis and press the Enter button.

3. Select the Cal Table to be used. The Name of the Cal Table is the Cal

Table Identier(the rst column in thebrackets when creating the Cal

Table). After the Cal# Basis has been selected, continue through Channel

Setup and save to Apply the Settings. The Cal Table is now ready for

use.

4. To use the Cal Table enter Product setup from the ARM Launcher page.

5. Use the Arrow keys to highlight the Cal Table Identier (e.g., GATE

HEIGHT) and press the Enter button. Select the desired calibration de-

scription. This selection will automatically change the Cal# in the sys-

tem.

Creating a Calibration Table Using the Legacy 6000

From Channel Setup, navigate to the • Primary Sensor page and press the

Settings softkey.

Use the

• Arrow keys highlight Cal# Basis and press the Enter button.

Name the Cal# Basis ( the name of the Cal Table). Once a name has

•

been established, continue through Channel Setup and apply settings.

Advance to the

• ARM Launcher page and select the Calibration softkey.

Choose the calibration procedure for the application and press the For-

ward Arrow softkey.

Enter button

Arrow keys

Settings softkey

Enter button

Arrow keys

Forward Arrow

softkey

Calibration

softkey

Settings softkey

1 2 ... 151 152 153 154 155 156 157 158 159

Sin comentarios

Teejet Legacy 6000 Manual Manual de usuario Pagina 156