Teejet Matrix Pro 840G User Manual Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 127
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
48
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
6. While the vehicle is moving in a slow forward motion,
turn the wheels all the way to the right.
7. Press LEFT arrow
.
8. Press the engage/disengage switch or foot switch to activate the
test. This will start a timer as well as turn the vehicle to the left.
WARNING! When using a UniPilot, the UniPilot will move the
steering wheel very quickly. Keep loose clothing, hair and
hands away from the steering wheel while preforming this
test.
9. Press the engage/disengage switch or foot switch when the
wheels are all the way to the right. The time displayed is the lock
to lock time.
10. Compare the lock-to-lock time with the recommended time.
11. Adjust the valve oil ow as needed and repeat test as needed.
Figure 6-37: Valve Test
Cong-> AutoSteer
Enabled
Valve Setup
Steering Settings
Valve Test
Valve Diagnostics
Options Angle Sensor
On
Cong-> AutoSteer->Valve Test
Note: Press foot switch to activate valve test.
Vehicle speed must be between 1.0 mph and 8.0 mph
0.0 s
Cong-> AutoSteer->Valve Test
Note: Press foot switch to activate valve test.
Vehicle speed must be between 1.0 mph and 8.0 mph
7.3 s
Valve Diagnostics
The valve diagnostic test veries if the valve is operating correctly.
This test is not necessary for UniPilot.
NOTE: The diagnostic tests do not require that the vehicle is in
motion. A valid GPS signal is not required.
Figure 6-38: Valve Diagnostics
Cong-> AutoSteer
Enabled
Valve Setup
Steering Settings
Valve Test
Valve Diagnostics
Angle SensorOptions
On
Cong->AutoSteer->Valve Diagnostics
Note: Press and hold foot switch to activate valve test.
Master
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 126 127

Comentarios a estos manuales

Sin comentarios