Teejet RX 400p Manual de usuario descargar pdf (Pagina 46)

RX 400p

98-05044 4-4

a A

No WAAS Lock WAAS Lock

Figure 4-4 WAAS Lock Icon

4.4.3 OmniSTAR Lock Icon

When operating using the internal L-band receiver as the differential source, the RX

400p receiver indicates the OmniSTAR DGPS lock status in the upper right corner of

the display. The lock symbol, illustrated in Figure 4-5, remains in the ‘No L-band’

DGPS Lock state until the receiver has acquired the DGPS satellite transmission at

which point the symbol changes to the ‘L-band Lock’ icon. The L-band DGPS

receiver will lock to the satellite signal although a valid subscription is not present

within the receiver in order to provide the facility to subscribe the receiver over the

air.

* +

No L-band Lock L-band Lock

Figure 4-5 L-band Lock Icon

Note - When using corrections from the OmniSTAR service, the GPS output of

the RX 400p will not be differentially corrected until lock has been attained on

an OmniSTAR broadcast with a subscribed receiver.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 150 151

Sin comentarios

Teejet RX 400p Manual de usuario Pagina 46