Teejet RX 400p Manual de usuario Pagina 134

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 151
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 133
RX 400p
98-05044 7-2
R1
No Beacon lock
Check antenna connections
Verify MSK rate is set correctly or choose Auto
MSK rate (100 200, or Auto)
Verify frequency of transmitting beacon, or choose
Auto?Tune@
Verify RX 400p antenna port output voltage (5
VDC)
No DGPS position in external
RTCM mode
Verify that the baud rate of the RTCM In (AUX)
port matches the baud rate of the external source
Verify the pin-out between the RTCM source and
the AUX port (transmit from the source must go to
receive of AUX and grounds must be connected -
Refer to Appendix B)
Low beacon SNR
Check integrity of antenna connections
Are other electronics interfering with reception?
Select alternate antenna position
Non-differential GPS output
Verify RX 400p lock status
Verify matched beacon output and GPS RTCM
input baud rates if using external source
Vista de pagina 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 150 151

Comentarios a estos manuales

Sin comentarios