Teejet Matrix 840G User Manual Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
26
Vehicle Type
Vehicle Type selects the type of vehicle steering that most closely
represents your vehicle.
1. Press VEHICLE TYPE ICON
2. Press UP/DOWN ARROW ICONS to change between:
Front Wheel Steer (also used for Combines)
Articulated
Tracked
3. Press
PAGE RIGHT ARROW to proceed to Antenna Height.
VEHICLE SETUP TAB to return to main Vehicle Setup
screen.
NOTE: This setting is required for FieldPilot and Tilt Sensor
Operation, as well as proper BoomPilot operation.
Figure 2-48: Vehicle Type
Antenna Height
Antenna Height sets the height of the antenna from the ground.
Range is 0.0 - 10.0 metres.
1. Press ANTENNA HEIGHT ICON
.
2. Use the entry screen to establish the antenna height.
3. Press
PAGE RIGHT ARROW to proceed to Direction to Boom.
VEHICLE SETUP TAB to return to main Vehicle Setup
screen.
NOTE: This setting is required for FieldPilot and Tilt Sensor
Operation, as well as proper BoomPilot operation.
Figure 2-49: Antenna Height
Direction to Boom
Direction to Boom sets whether the boom is located behind or in front
of the GPS antenna as the vehicle moves in a forward direction.
1. Press DIRECTION TO BOOM ICON
2. Press UP/DOWN ARROW ICONS to change between:
Backward – indicates the boom is located behind the GPS
antenna
Forward – indicates the boom is located in front of the
GPS antenna
3. Press
PAGE RIGHT ARROW to proceed to Boom Offset
Distance.
VEHICLE SETUP TAB to return to main Vehicle Setup
screen.
NOTE: This setting is required for FieldPilot and Tilt Sensor
Operation, as well as proper BoomPilot operation.
Figure 2-50: Direction to Boom
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

Comentarios a estos manuales

Sin comentarios