Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario descargar pdf (Pagina 21)

www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Sprayer

Implement Parameters

Figure 3-16: Implement parameters

Figure 3-17: Section Width

Implement Parameters establishes the following:

►Section Width – sets the spraying width during application.

►Nozzle Preset Setup – where up to ve (5) sets of nozzle options can be

established to set the nozzle type, size, low/high pressure limit, reference ow

and reference pressure.

►Regulation Parameters – where adjustments to the valve calibration, nozzle

spacing and regulations mode can be established.

Section Width

Section Width sets the spraying width during application.

Boom Section Width

Section Width establishes the boom sections widths for each boom section.

NOTE: The number of boom sections available is set on the Implement

Parameters screen in the OEM section.

• To select the Boom Section Width, use the number pad or slide bar.

When the section widths are changed, power must be cycled in order to update the

TASC Controller on the VT.

One-Touch Equal Widths

One-Touch Equal Widths sets all boom section widths to the value set for #1 Boom

Section.

• To set all boom section widths, press the EQUAL SECTION WIDTH KEY .

Nozzle Preset Setup

Figure 3-18: Nozzle Preset Setup

Figure 3-19: Nozzle Size on the Operating Screen

Nozzle Preset Setup establishes up to ve (5) sets of nozzle options setting the

nozzle type, size, low/high pressure limit, reference ow and reference pressure.

Nozzle Preset

Each one of up to ve (5) Nozzle Presets can be selected to establish different sets

of nozzle options.

• To select the Nozzle Preset set, use the number pad or slide bar.

Nozzle Type

Nozzle Type sets whether the nozzle’s size will be selected from a general section

of established tips or a optional user tip.

• To select the Nozzle Type, select an option from the drop down menu or use

the UP/DOWN ARROWS to highlight the option.

Nozzle Size

Nozzle Size sets the nozzle from a list of established sizes (see chart below) or

from a optional user tip.

• To select the Nozzle Size, select an option from the drop down menu or use

the UP/DOWN ARROWS to highlight the option.

Established Nozzle Sizes and Colors

Size Color Size Color

01 Orange 05 Brown

015 Green 06 Grey

02 Yellow 08 White

025 Purple 10 Light Blue

03 Blue 15 Light Green

04 Red 20 Black

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Comentarios a estos manuales

Sin comentarios

Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Teejet IC18 SPRAYER JOB COMPUTER