Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario descargar pdf (Pagina 20)

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

Density Factor

Density Factor establishes the weight per volume setting based on the type of fertilizer being used.

• To select the Density Factor, use the number pad or slide bar.

The fertilizer’s ability to ow is affected by a number of factors. These factors may vary with each batch and it may change due to weather

(humidity, etc.). In order to accommodate for this, the job computer uses a density factor to compensate for the nature of the applied

fertilizer.

Full Tank

Full Tank returns the Actual Content volume value to the maximum volume of the tank

• To reset the Actual Content value, press the FULL TANK KEY .

Operation

Figure 3-14: Operation

Figure 3-15: Step % Increase/Decrease

Cnt 5

5.0 283

4070 l

bar

1.14 ha

+ 5%

1311

l/hakm/h

Operation establishes Application Rate Step, Speed Source and Simulated Speed.

Application Rate Step

Application Rate Step is the percent of increase/decrease “boost” of the active

application rate at which the product is being applied.

• To select the percentage, use the number pad or slide bar.

Speed Source

Speed Source selects whether to base the machine’s speed on input from the

CAN, an Implement or a Simulated source. Selecting “Implement” will allow for

the conguration of pulses per 100 meters. Selecting “Simulated” will allow for

simulated speed to be entered using the “Edit Value” option. Selecting “CAN”

allows for speed being supplied by the ISOBUS CAN (usually from the TECU) to be

used.

• To select the Speed Source, select an option from the drop down menu or use

the UP/DOWN ARROWS to highlight the option.

NOTE: If “Implement” is selected, refer to the Calibrations section for further

instructions.

Simulated Speed

Simulated Speed establishes a speed to be used when using the Simulated Speed

source.

• To select the Simulated Speed, use the number pad or slide bar.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Comentarios a estos manuales

Sin comentarios

Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Teejet IC18 SPRAYER JOB COMPUTER