Teejet LH 3000 Manual de usuario descargar pdf (Pagina 15)

LH 3000

OPERATING MANUAL

AGRO 15

FUNCTION KEYS

RPM

By pressing this key RPM will be displayed (sensor must be mounted).

WARNING: Is control of RPM wanted the wanted RPM figure must be encoded

here as follows:

1. Press for app. 3 seconds, until figure keys are lit.

2. Encode the wanted RPM.

3. Press again.

NB! The maximum deviation to be encoded during encoding (“SYSTEM”-key)

point 08.

The warning function is only active when the implement operates.

TIMER

The timer shows consumed working time.

The timer is started and stopped by pressing the key. A flashing dot indicates

“operation”, a fixed point “stop”.

The timer counts to maximum 99 hours and 59 minutes after which it will restart

from zero. The consumed time can be stored for later print of job cards. See

“JOBNO” and “MEMO”.

ZEROING OF TIMER

Press “MEMO” until 2 horizontal bars and “STO” is displayed simultaneously with

3 quick warnings.

The timer is zeroed.

NOTE: Zeroing of timer causes zeroing of consumption from tank and area trip

simultaneously.

SPEED

Forward speed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Teejet LH 3000 Manual de usuario Pagina 15