Teejet GuideLine SmartPad II Manual de usuario Pagina 195

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 194
Fieldware for Smartpad II
Software Version 4.02
Chapter 5 - Field Mapping 5-23
The Polyline Stream Mode
The Polyline Stream Mode
This mode is used to map or locate features that can be represented by a line. A continuous line will be mapped at the
designated antenna location.
To map a polyline stream select the polyline stream button once selected a name must be established Figure 5-29.
After a name is entered begin driving the path to be located. Notice when the polygon stream button is selected the
button changes to a finish flag see Figure 5-30. To stop mapping a line select the finish flag and all Mapper modes
will appear in the button bar.
Figure 5-29: Polyline Stream Setup
Figure 5-30: Ending Polyline Stream
Vista de pagina 194
1 2 ... 190 191 192 193 194 195 196 197 198

Comentarios a estos manuales

Sin comentarios