Teejet Fieldware Link Manual de usuario descargar pdf (Pagina 22)

www.teejet.com

Fieldware

Link 4.02

►Section Width (under Working Width in Matrix Pro GS v3.xx) –

used to enter the width of each section of the implement. Each

section can be a different width. Sections are numbered from left

to right while facing in the machine’s forward direction. Range for

each section is 0.0 to 246.06 feet/ 0.0 to 75.0 meters. Total for all

sections must be greater than 3.28 feet / 1.0 meters.

►Spread Length  – used to enter the length of the application

section for each section. Each section can be a different length.

Sections are numbered from left to right while facing in the

machine’s forward direction. Range is 0.0 to 246.06 feet/

0.0 to 75.0 meters.

►Section Offsets  – used to enter the offset distance from the

leading edge of Section 1 (the spread offset line) to the leading

edge of each section. Section 1 is always 0.0 meters. All other

sections can be a different distances. Sections are numbered

from left to right while facing in the machine’s forward direction.

Range is 0.0 to 246.06 feet/ 0.0 to 75.0 meters.

Job Specic Defaults

►Overlap – used to select the amount of overlap allowed when

the sections are turned on and off while using automatic boom

section control

Figure 40: Basic Properties

Figure 41: Implement Offset Distance and Direction

Figure 42: Machine Settings – TeeJet Spreader Implement Type

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

Teejet Fieldware Link Manual de usuario Pagina 22