Teejet Matrix Pro 840G Assisted/Auto Steering Setup Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 21
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
10
www.teejet.com
Assisted/Auto Steering
Steering Settings
Steering Settings is used to congure Coarse Adjustment, Fine
Adjustment, Deadband and Lookahead settings.
1. Select Steering Settings .
2. Select from:
►Coarse Adjustment
– used to select how aggressively the
vehicle maintains a guideline in Straight AB Guidance
►Fine Adjustment
– used to select how aggressively the
vehicle maintains a guideline in Curved AB Guidance
►Deadband
– used to set if steering is too choppy/
responsive or remains consistently off the guideline
►Lookahead
– used to select the vehicle’s approach to the
guideline in Straight AB Guidance mode
Figure 20: Steering Settings
Cong-> AutoSteer
Enabled
Valve Setup
Steering Settings
Valve Test
Valve Diagnostics
Angle SensorOptions
On
Cong-> AutoSteer->Steering Setting
Coarse Adjustment
Fine Adjustment
Deadband
Lookahead
125.0
4.0 s25.0
Coarse Steering Adjustment
Coarse Adjustment adjusts how aggressively the vehicle maintains
a guideline in Straight AB Guidance mode. Range is 0.0 - 100.0.
Default is 25.0.
1. Press:
►UP arrow if the vehicle is drifting away from the guideline or
not approaching it fast enough.
►DOWN arrow if the vehicle is oscillating rapidly or
overshooting the guideline.
Figure 21: Coarse Steering Adjustment
Cong-> AutoSteer->Steering Setting
Coarse Adjustment
Fine Adjustment
Deadband
Lookahead
125.0
4.0 s25.0
Fine Steering Adjustment
Fine Adjustment adjusts how aggressively the vehicle maintains
a guideline in Curved AB Guidance mode. Range is 0.0 - 100.0.
Default is 25.0.
1. Press:
►UP arrow if the vehicle drives outside of corners.
►DOWN arrow if the vehicle cuts corners.
Figure 22: Fine Steering Adjustment
Cong-> AutoSteer->Steering Setting
Coarse Adjustment
Fine Adjustment
Deadband
Lookahead
125.0
4.0 s25.0
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Comentarios a estos manuales

Sin comentarios