Teejet Swath XL Manual de usuario descargar pdf (Pagina 154)

Chapter 4 - Waypoint Navigation 4-34

Nav 2 Point Real-Time Scenarios

Swath XL

Software Version 3.00

Once in the real-time view page, the operator can either drop a sample point or select an existing point to navigate to.

Figure 4 -42, shows the operator selecting the Start Navigation button (left side). Once the Start Navigation button is

selected, the Navigate to dialog appears, Figure 4 -42 (right side) This dialog lists any points or sample points that

exist in the Grid/Points file. Once a point is selected, the operator is guided to the point via a line that connects the

vehicle to the selected point, Figure 4 -43. Note that the Start Navigation button changes to the Stop Navigation but-

ton. The operator selects the Stop Navigation button when they are finished navigating to the selected point, Figure 4

-43 (right side). If the operator has elected to use the lightbar as a navigation aid, see “Lightbar Setup” on page 4-15,

then the lightbar also displays distance to point and point name and guides the operator to the point, using the Cross-

track LEDs.

Figure 4-41: Entering the Starting Sample Point Number

Figure 4-42: Selecting a Point to Navigate to.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 160 161 162

Sin comentarios

Teejet Swath XL Manual de usuario Pagina 154