4
www.teejet.com
5
98-01380 R0
#5 Cultural Setup
1. Press CONSOLE side tab .
2. Press Cultural .
3. Select from:
►Units
– denes the system measurements
►Language
– denes the system language
►Time Zone
– establishes the local time zone.
4. Press RETURN arrow or CONSOLE side tab to
return to the main Console screen.
Figure 1-3: Cultural Options
Console Settings
Display
Cultural
Sound
About
Console->Cultural
Units US
Language
Time Zone
English-US
UTC
#6 Vehicle Setup
1. Press CONFIGURATION side tab .
2. Press Vehicle .
3. Select from:
►Vehicle Type
– selects the type of vehicle that most
closely represents your vehicle
►Antenna Height
– sets the height of the antenna from
the ground
►Direction to Boom
– sets whether the boom is
located behind or in front of the GPS antenna
►Distance to Boom
– denes the distance from the
GPS antenna to the boom
4. Press RETURN arrow
or CONFIGURATION
side tab
to return to the main Conguration screen.
Figure 1-4: Vehicle Setup Options
Conguration
Vehicle
Implement
AutoSteer
Tilt
Lightbar
GPS
Video
Cong-> Vehicle
Vehicle Type
Ant Height
Dir to Boom
Dist to Boom
12.50 ft
0.00 ft
Front Wheel
Backward
CONFIGURE
#7 Implement Setup
When a SmartCable or Section Driver Module (SDM) is not
present only a single boom setup is available. Congurations
for Overlap, Delay On and Delay Off will not be available, and
Number of Sections will be set to one.
1. Press CONFIGURATION side tab
.
2. Press Implement .
3. Select from:
►Number of Boom Sections
#
– establishes the number
of boom sections
►Guidance Width – establishes the width between
guidelines
►Spray Width – establishes the width of each boom
section for a total spray width
►Overlap – determines the amount of overlap allowed
►Delay On – establishes the timing for the boom
section valves to switch on
►Delay Off – establishes the timing for the boom
section valves to switch off
4. Press RETURN arrow
or CONFIGURATION
side tab
to return to the main Conguration screen.
NOTE: Press
or to switch between Implement setup
screens.
#8 AutoSteer Setup
When a Steering Control Module (SCM) is present, AutoSteer
options will be available. For detailed setup instructions, refer
to your specic FieldPilot or auto steering installation manual
or visit www.teejet.com for the full Matrix Pro User Manual, part
number 98-05238.
NOTE: An update of your SCM software may also be required
when updating an existing Matrix console to Matrix Pro.
SCM Software Version Required
SCM Software
Version Matrix 1.x Matrix Pro 2.x
1.03 ●
1.04 ●
1.05 ●
10.0 ●
Figure 1-5: Implement Setup Options
Conguration
Vehicle
Implement
AutoSteer
Tilt
Lightbar
GPS
Video
Cong->Implement
Num Sections
Spray Width
Guidance Width
75.00 ft
75.00 ft
15
Cong->Implement (2)
Overlap
Delay O
Delay On
1.00 s
1.00 s
50%
(9 paginas)
(9 paginas)
(9 paginas)
(9 paginas)
(9 paginas)
(12 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales