Teejet IC18 SPREADER JOB COMPUTER Manual de usuario descargar pdf (Pagina 26)

98-05173 R1 US

ISOBUS Job Computer : IC18 Spreader NA

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

MACHINE

Machine congures machine settings. Options include Filling, Operation, Implement Parameters, Calibrations,

Alarm Congurations and OEM.

MAIN SETUP MODE MENU STRUCTURE

| | | | | |

Counters Job Parameters Machine User Interface Communication Help

Filling

Operation

Implement parameters

Pulses per Volume – Calibrations

Implement Speed Sensor Alarm congurations

OEM

The OEM setup menu is password protected and the settings in this menu are directly related to the tted OEM equipment.

Figure 3-15: Machine

1. From the Main Setup Screen , select MACHINE.

2. Select from:

►Filling – establishes the amount of material

remaining in the bed.

►Operation – establishes Speed Source, and

Simulated Speed.

►Implement Parameters – establishes the Working

Width, Fast Empty Bed RPM and Master Switch

location.

►Calibrations – establishes either manual or

automatic settings of the sensors.

►Alarm Congurations – establishes alarms on or off

as well as sets their trigger level

►OEM – The OEM setup menu is password protected and the settings in this menu are directly related to the

tted OEM equipment. Refer to the OEM manual for information regarding OEM settings.

NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save

the setting. Select the ESCAPE KEY to escape without saving settings and return to the previous

menu.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

Sin comentarios

Teejet IC18 SPREADER JOB COMPUTER Manual de usuario Pagina 26