Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario descargar pdf (Pagina 33)

98-05204 R1 US

ISOBUS Job Computer : IC18 Sprayer

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

Nozzle Preset Setup

Figure 3-19: Nozzle Preset Setup

Nozzle Preset Setup establishes up to ve (5) sets of

nozzle options setting the nozzle type, size, low/high

pressure limit, reference ow and reference pressure.

Nozzle Preset

Each one of up to ve (5) Nozzle Presets can be selected

to establish different sets of nozzle options.

• To select the Nozzle Preset set, use the number pad

or slide bar.

Nozzle Type

Nozzle Type sets whether the nozzle’s size will be

selected from a general section of established tips or a

optional user tip.

• To select the Nozzle Type, select an option from the drop down menu or use the UP/DOWN ARROWS to

highlight the option.

Nozzle Size

Nozzle Size sets the nozzle from a list of established sizes (see chart below) or from a optional user tip.

• To select the Nozzle Size, select an option from the drop down menu or use the UP/DOWN ARROWS to

highlight the option.

Established Nozzle Sizes and Colors

Size Color Size Color

01 Orange 05 Brown

015 Green 06 Grey

02 Yellow 08 White

025 Purple 10 Light Blue

03 Blue 15 Light Green

04 Red 20 Black

Figure 3-20: Nozzle Size on the Operating Screen

When “General” nozzle type is selected and a establised

nozzle size is selected, the Low Pressure Limit, High

Pressure Limit, Reference Flow and Reference Pressure

elds will be automatically set with the standard settings

for the specic nozzle chosen. These setting can be

manually adjusted.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

Sin comentarios

Teejet IC18 SPRAYER JOB COMPUTER Manual de usuario Pagina 33