Teejet CenterLine with Swath Manager 5 Manual de usuario descargar pdf (Pagina 2)

Page 2 of 2

CenterLine Settings

• The Swath Man setting is only available when Swath Manager 5 is detected.

• When Swath Manger 5 is detected the Status setting is deactivated.

• In Guidance Setup the Width setting is used for guidance only.

Swath Man

1. Select the desired %overlap (0%, 50%, 100%)

2. Enter the number of boom sections 1-5

3. Enter the width for each boom section

4. Set a delay in seconds. This will act as a look ahead to turn booms off and on when

entering and exiting an applied zone

Swath Manager 5 & Controller Switch Configuration

Figure 3: Swath Manager 5 Setup

Figure 4: Switch Positions

Width

Ahead

Antenna

GPS Type

1HZ MSG

Alarm

To Start

Swath Man

% Overlap

Sections

Width 1

Delay

To Start

50%

100%

GUIDANCE

SETUP

SWITCH POSITIONS

Swath Manager 5

System

original Master Switch

SM5 Master Switch

SM5 Boom Switches

Engage / Disengage

Swath Manager 5 Auto

Boom mode

ON OFF ON ON Engage

Swath Manager 5

Manual Boom mode

ON OFF ON ON Disengage

For Individual boom section

control use SM5 boom switches

TeeJet Controller ONLY the controller master switch OFF will

force all boom sections OFF.

Controller boom switches ON will force boom sections ON

Controller Master Switch or

Controller Boom Switches

or original Boom Switches

Auto Boom Switch

1 2

Manager 5 1
Swath Man 2

Comentarios a estos manuales

Sin comentarios

Teejet CenterLine with Swath Manager 5 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Teejet CenterLine with Swath Manager 5