Teejet CenterLine v1.07 Manual de usuario descargar pdf (Pagina 51)

CenterLine

Software Version 1.07

CenterLine 45

CenterLine Real-Time Operation

Curve AB Guidance Operation

The Curve AB guidance mode works similar to Straight-Line mode except it provides vehicle guid-

ance along curved lines, based on a curved reference guideline. The first step is to establish the

reference guideline. This reference guideline is used to calculate all other parallel guidelines. See

See “Marking A and B Locations” on page 34 for more detail on how to establish a reference

guideline.

To mark the initial point A, begin driving along the first swath path (See Figure 46). It is recom-

mended that the reference guideline be established along the longest side of the field, if

possible, because the curved guidelines do not extend beyond the A and B points (See Fig-

ure 47). This can leave areas of the field where guidance information is not available. While

the vehicle is driving along the initial swath, the lightbar displays <MARK A>. As the vehicle

passes over the desired A location, press Enter to establish the guideline point A.

Figure 46: Marking AB Line in Curved Guidance

Figure 47: Curve AB Mode guideline limitations

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Sin comentarios

Teejet CenterLine v1.07 Manual de usuario Pagina 51