Teejet 814-AB Airblast Sprayer Monitor Manual de usuario descargar pdf (Pagina 10)

814-AB Sprayer Monitor Programming and Operating Manual US 9/98 Page 10 of 15

Only right hand side is active:

5.0 ft O->

Press the Up or Down key to select another display.

Changing the Working Width

The working width (distance between the trees) can quickly be changed by pressing the Pro

key when the width is displayed. The following screen will be shown:

> 10.0 ft <--->

The width number will be flashing and can now be changed with the Up and Down keys.

Pressing Pro again after the value is entered will save the new working width and the console

returns to the steady working width screen.

SPEED AND APPLICATION RATE

The next monitor display is the speed and application rate display. On the left the current

speed is shown in MPH (km/h) and on the right hand side the current dose rate in GPA (l/ha)

is shown. When the Master switch is switched off, the application rate shown is zero.

5.0 mph 50 Gpa

Press the Up or Down key to select another display.

APPLICATION RATE AND PRESSURE

In this display the application rate in GPA (l/ha) and the pressure in PSI (bar) are shown.

The pressure is only shown when there is a pressure sensor installed.

20 Gpa 30 PSI

Press the Up or Down key to select another display.

FLOW RATE AND PRESSURE

In this display flow in GPM (l/min) and the pressure in PSI (bar) is shown. The pressure are

only shown when there is a pressure sensor installed.

10.2 GPM 25 PSI

Press the Up or Down key to select another display.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Teejet 814-AB Airblast Sprayer Monitor Manual de usuario Pagina 10