Teejet 801 flowmeter Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
98-01087-R3
© TeeJet Technologies 2011
TeeJet Technologies
1801 Business Park Drive
Springeld, Illinois 62703 USA
Tel: (217) 747-0235 • Fax: (217) 753-8426
www.teejet.com
INSTA L L AT I O N
Specications
The 801 Flow Meter meets the following specications:
Measuring Data
Linearity at recommened ow range +/- 3.0%
Flow Range 2-60 GPM (7.5-225 LPM)
(3-30 GPM recommened for max life)
Maximum Working Pressure 300 PSI (20.7 Bar)
Pressure Drop 10 GPM (37.85 LPM) - NA
20 GPM (75.71 LPM) - 3 PSI (0.21 Bar)
30 GPM (113.56 LPM) - 7.5 PSI (0.52 Bar)
40 GPM (151.42 LPM) - 12.5 PSI (0.86 Bar)
50 GPM (189.27 LPM) - 19.5 PSI (1.34 Bar)
60 GPM (227.12 LPM) - 29 PSI (2.0 Bar)
Measuring range is partly dependent on the selected type and size of connectors.
The flow meter is bi-directional for mounting purposes.
Electrical Data
Sensor Open collector NPN
50% square wave
10-300 Hz in operating range
Calibration Number (Approximate) TeeJet Controller 82 pulses/liter, Mid-Tech 310 pulses/gallon
LED Indicators Green-Power
Orange-Signal
Measuring Data
Body & Insert 30% glass lled polypropylene
Shaft 410 hardened stainless steel
Turbine & Bearing Support 20% talc lled polypropylene
Bearing Sapphire
Bearing Housing 303 stainless steel
Warranty
The warranty on this equipment may be affected for the following reasons:
Improper installation
Obvious abuse
Lack of, or improper maintenance
Employed in a manner inconsistent with its intended use
Used with chemicals that are incompatible with the materials which this product is made of
(See “Warranty and Limitations” statement in your controller manual for other limitations)
This ow meter is manufactured using some or all of the following materials:
303 Stainless Steel
410 Stainless Steel
Polypropylene
TeeJet Technologies does not recommend metering any product that reacts with these materials and damage resulting from the use of such products will not be
covered under the warranty. Please contact your chemical supplier to verify that the chemicals you are using are compatible.
If you have any questions about installation or use, refer to the installation section of your manual or call your TeeJet Technologies dealer.
Vista de pagina 1
1 2

Comentarios a estos manuales

Sin comentarios